modtronix.com

MicroX and Presto Range (8-Bit PIC board, mixed 3.3/5V) => MicroX Modules and SBC Boards => USB Boards => Topic started by: MORA99 on January 21, 2009, 08:37:34 AM

Title: ds1307
Post by: MORA99 on January 21, 2009, 08:37:34 AM
Does anyone have some code to get a DS1307 working with the USB boards (PIC18F4550) ?

I have tried the code OmarZ made for the ethernet boards, but it requires a i2c file from the net codebase.
As far as I know the usart and spi uses the same pins on the 4550, so a software i2c would be needed so that usart is left for hardware serial.