Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jaa

Pages: [1]
1
Ethernet Boards (8-bit) / Doubts on tick
« on: February 06, 2007, 06:54:56 PM »
Hi folks,

Does someone could explain me why there not a regular 1 second blinking of led 6 (at port B6) neither led 3 (at port A3) in the following application?

 while(1)
    {
        //Blink SYSTEM LED every second and reading RTC
       
        if (appcfgGetc(APPCFG_SYSFLAGS) & APPCFG_SYSFLAGS_BLINKB6) {
            if ( TickGetDiff8bit(t) >= ((TICK8)(TICKS_PER_SECOND/1)) )
            {
                t = TickGet8bit();
                  TRISB_RB6 = 0;
                rtc_read();  ///  Tarea de RTC
                  LATB6 ^= 1;
            }                   
        }

      if ( TickGetDiff8bit(t1) >= ((TICK8)(TICKS_PER_SECOND/1)) )
            {
                t1 = TickGet8bit();
                TRISA_RA3 = 0;
                LATA3 ^= 1;
                p=p+1;
             if(p>9) p=0;   
                          }
                         
      if ( TickGetDiff8bit(td1) >= ((TICK8)(TICKS_PER_SECOND/8)) )
            {
                td1 = TickGet8bit();
                dev7Service(p);
                          }
      scfInit_MODEM();
       scfCalling_MODEM();
...
   


Br,
Jaa

2
Ethernet Boards (8-bit) / Multiple RS232 interfaces
« on: September 11, 2006, 07:09:27 PM »
Hi gentlemen,

Does some have experience implementing more than one RS232  interfeces with SBC68EC board. I guess it is possible to build up a software USART( like ) for applications requiring more than the PIC hardware USART.
I am crazy :?

Br,
Jaa

3
Ethernet Boards (8-bit) / HTTP commands
« on: August 31, 2006, 09:05:22 PM »
Dear All,

In my web application I am using the following command:
<td nowrap><div align="center"><code>E=5F</code> </div></td>
but it does not work.
If I use the command http://10.0.0.6/?E=5F  it works.
What is wrong in my first command?

Br,
jaa

4
Ethernet Boards (8-bit) / Help compiling SBC68EC rev 3.04
« on: August 21, 2006, 11:53:33 AM »
Hello,

Trying to compile a project for SBC68EC rev 3.04 with MPLAB 7.30 and MPLAB C18 3.02, I got the following error message:

MPLINK 4.02, Linker
Copyright (c) 2006 Microchip Technology Inc.
Error - could not find definition of symbol 'AARGB3' in file 'C:\mp730b_full\websrvr68_v304\src\net\tmp\helpers.o'.
Errors    : 1


After I tried with SBC68EC rev 3.02 . I got :

MPLINK 4.02, Linker
Copyright (c) 2006 Microchip Technology Inc.
Error - could not find definition of symbol 'FPFLAGS' in file './c018i_v300_x800.o'.
Errors    : 1


Does someone can help me?

Br,
jaa

5
Ethernet Boards (8-bit) / Error compiling SBC68EC rev 2.04
« on: February 05, 2006, 01:03:07 PM »
Dear all,

Trying to compile a project for SBC68EC rev 2.04 with MPLAB 7.2 and MPLAB C18 I got the following error messge:

MPLINK 3.94, Linker
Copyright (c) 2005 Microchip Technology Inc.
Error - Coff file 'c:\mcc18\lib/c018i.o' does not appear to be a valid COFF file.
Errors    : 1


Did someone suffer like this and find out solution? :?

Regards
jaa

Pages: [1]