Author Topic: === New V2.03 Beta Firmware Available ===  (Read 5084 times)

modtro2

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
    • View Profile
=== New V2.03 Beta Firmware Available ===
« on: May 30, 2012, 01:19:58 AM »
There is a new V2.03 Beta (14 Mar 2014) firmware available. Have added many new HTTP and USB commands, RTOS Fiber support, DS18B20, DHT11, DHT22 sensors and more. Also added I2C and 1-Wire support.

The firmware contains many new features, and can be downloaded here.

The firmware documentation is included with the documentation, and an online version is also available here.
« Last Edit: March 14, 2014, 02:42:49 AM by modtro2 »

Maurice.Birchler

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: === New V2.03 Beta Firmware Available ===
« Reply #1 on: May 21, 2015, 04:28:20 PM »
Thanks for making this beta release available.
By loading this firmware I now can make the Http:/mchpboard/?ox6=1 set the pin voltage. This would not work under the earlier firmware.
But now I have a new problem due to my lack of understanding.
After updating the firmware, the webpages are not displaying the ~#tags~ correctly. And I assume that this is due to the mismatch of HTTPPrint.h with the firmware.
When I regenerate the webpage .bin file using the MPFS2 utility, I noticed that it also creates a new HTTPPrint.h file using information it gathers from the ~#tags~ in the html (I think).
I don't want to spend over $500 licence for a project compiler and try developing in C to try and get the webpages to display all the tags that are specified at http://netcruzer.com/project-webserver-tags.
I thought that this could be done by editing the htm files and regenerating the .bin webpage files.
But when I do this the web pages lose their display format.
1. Can you make available the htm src files that belong with this version of the firmware?
2  Does the freshly generated HTTPPrint.h file need to included in the generated .bin webpages file?
Many thanks in advance for your consideration and help.
Maurice Birchler (New Zealand)

Maurice.Birchler

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: === New V2.03 Beta Firmware Available ===
« Reply #2 on: May 24, 2015, 12:29:57 PM »
I have found the html files in the beta zip files and loaded NZDefault.
\netcruzer_v203beta140314.zip\netcruzer_v203\src\projects\webserver\WebPages
Many of the ~#tags~ are returning erroneous values. For example, all of the network settings are showing as !Def.
I will continue trial and error editing the web pages.

modtro2

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
    • View Profile
Re: === New V2.03 Beta Firmware Available ===
« Reply #3 on: May 25, 2015, 12:36:10 PM »
Hi Muarice

Will look at this a bit later this week. Are there any other tags you need supported?

Also, you don't have to spend $500 on a compiler license. The free MPLAB XC16 compiler works just fine. It just creates code a bit larger.

Basically to prevent to !Def from being displays, you have to us a matching firmware and matching web page files.

Maurice.Birchler

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: === New V2.03 Beta Firmware Available ===
« Reply #4 on: May 26, 2015, 07:44:13 PM »
Thanks for considering.
I will be very happy to have access to the tags listed in http://netcruzer.com/project-webserver-tags.
RGDS Maurice

Maurice.Birchler

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: === New V2.03 Beta Firmware Available ===
« Reply #5 on: May 27, 2015, 08:33:54 PM »
Actually, to date, my project is wanting to show the tags:-
~#ix6~              ~#iy6~               ~#ix3~
digital output      digital output       analogue comparator input