Author Topic: Debugging SBC68EC  (Read 2034 times)

jjjjjjjjjjjjjjjjjjjjjjjjj

  • Newbie
  • *
  • Posts: 4
    • View Profile
Debugging SBC68EC
« on: July 31, 2013, 11:07:50 AM »
Is there a way to debug an SBC68EC with a pickit2 or a pickit3? I remember seeing something on the ICD2 a while back but can't find it anymore. I am using MPLAB v8.91 with the c18 compilier.

Thanks,
Steven

modtro2

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
    • View Profile
Re: Debugging SBC68EC
« Reply #1 on: August 01, 2013, 06:26:22 PM »
Hi, you can use the PICKit 2, PICKIt 3, ICD 2 or ICD 3 to debug your board via MPLAB or MPLAB X. All you need is a programming adaptor. For the PICKit you need the PGM2KIT, and for the ICD you need the PGM06 adaptor. See:
http://www.modtronix.com/index.php?cPath=32

For details on programming and debugging, see:
http://www.modtronix.com/picboards/prog/

jjjjjjjjjjjjjjjjjjjjjjjjj

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Debugging SBC68EC
« Reply #2 on: August 05, 2013, 12:43:13 PM »
My SBC68EC has a bootloader that I can use to program the board via ethernet cable. I have heard the bootloader will be wiped out if I do  use a debugger incorrectly. Is there somewhere I can find instructions for correctly configuring my PICKIT 3?