Author Topic: Webserver ----> http://mchpboard ... not work?!?!  (Read 3668 times)

sga

  • Newbie
  • *
  • Posts: 3
    • View Profile
Webserver ----> http://mchpboard ... not work?!?!
« on: June 08, 2012, 12:32:01 PM »
Hello,

I loaded on board SBC66EC the firmware I downloaded from the site www.netcruzer.com.
I used to load it with MPLAB & ICD3, opening the following project:
netcruzer_v100/src/common_proj/webserver/sbc66ec_webserver.mcp.
Once restarted the card SBC66EC, connecting to the LAN,
I see the device with the discoverer MCHPBOARD with an address assigned by DHCP server.
I can also run ping successfully.
But if I open the browser to the following addresses, webserwer does not work!!!
http://ipadress
http://mchpboard
This is normal, what is wrong?

thanks.

netcruze

  • Jr. Member
  • **
  • Posts: 63
    • View Profile
Re: Webserver ----> http://mchpboard ... not work?!?!
« Reply #1 on: June 09, 2012, 03:31:40 PM »
Hi

Do you see anything in the browser at all? After programming the board with new firmware, you might have to update the webpages. Easiest is to enter http://mchpboard/mpfsupload in your browser, and give webpages. I attached the webpages file (sbc66ec_webpages_v100.bin) for you.

Can you try to program (with ICD 3) your board with the attached hex file. This is the hex file we program onto the boards at delivery, and contains both the  USB Bootloader and Webserver.

sga

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Webserver ----> http://mchpboard ... not work?!?!
« Reply #2 on: June 10, 2012, 01:01:17 AM »
Very nice, now it works!  8)
My SBC66EC was not updated, because I bought it last year.
Thank you very much!