Author Topic: V102 of SBC66EC and SBC66ECL firmware  (Read 3052 times)

mg7

  • Newbie
  • *
  • Posts: 10
    • View Profile
V102 of SBC66EC and SBC66ECL firmware
« on: July 22, 2012, 04:15:22 AM »
The V102 zip-file no longer has workspace / project files for MPLAB 8 - should / must I upgrade to MPLAB X in order to use these files ?

netcruze

  • Jr. Member
  • **
  • Posts: 63
    • View Profile
Re: V102 of SBC66EC and SBC66ECL firmware
« Reply #1 on: July 24, 2012, 07:52:43 PM »
Hi, we only use MPLAB X for projects now. It has so many great features, specially with regards to the C code editor. The debugging is still a bit unstable, but I personally never use it. I use the Netcruzer USB Terminal for all debugging - I find it easier than setting breakpoints and stepping through code.

Do not install the XC16 compiler when installing MPLAB X! It is only in version 1.00, and seems to create problems when using together with C30 C compiler.

mg7

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: V102 of SBC66EC and SBC66ECL firmware
« Reply #2 on: July 26, 2012, 07:08:53 AM »
trying to find my way around with MPLAB X... looks like there is missing an included file:

../HardwareProfile.h:73:45: error: modtronix/boards/sbc66ec-r2.h: No such file or directory

netcruze

  • Jr. Member
  • **
  • Posts: 63
    • View Profile
Re: V102 of SBC66EC and SBC66ECL firmware
« Reply #3 on: July 26, 2012, 06:23:26 PM »
Hi, sorry, will upload new "Netcruzer Download" today. I included the file in this post too.

mg7

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: V102 of SBC66EC and SBC66ECL firmware
« Reply #4 on: July 26, 2012, 11:27:09 PM »
thanks, next error is:

make[2]: *** No rule to make target `../doxygen/src_examples/ex_doxygen.c', needed by `build/default/production/_ext/2119444062/ex_doxygen.o'.  Stop.

netcruze

  • Jr. Member
  • **
  • Posts: 63
    • View Profile
Re: V102 of SBC66EC and SBC66ECL firmware
« Reply #5 on: July 28, 2012, 06:28:16 PM »
Hello, best is if you just download the "Netcruzer Download" again. Seems like there were more files missing. The first version of the "Netcruzer Downloads" had these files missing. Please download it again here:
http://www.netcruzer.com/nz/netcruzer_v102.zip

After downloading, unzip, and open "src/common_proj/webserver/sbc66ecl-r2_webserver.X" MPLAB X project. I did a "Clean and Build" project test, and it all compiles fine.