Author Topic: SBC68EC dead?  (Read 1689 times)

parotin

  • Jr. Member
  • **
  • Posts: 8
    • View Profile
SBC68EC dead?
« on: April 21, 2015, 02:32:34 PM »
Hello,

My english is not so good, just let me do a list of what happen with my board just to know If I can thru it away and buy an SBC66 board:

-the last (and unic) that was working great on it was websrvr_mc_hw221 with MY_DEFAULT_IP_BYTE1, 2 3 and 4, mask and http port changed in projdefs.h) I allways had doubts because the proper one for me should be  websrvr_mc_hw320.

-suddenly ip address and http port can't be changed. Netloader connect, the modified hex file seems like is uploaded, but it's always on the used ip address. However I can make changes in mxwebsrvr.c file, and that works (???)

- finaly now, in safe mode it just can be connected with netloader to one of the addresses (192.168.1.1), and after upload any .hex file, it just doesn't answer any http request. In normal mode it just doesn't exist on my lan...

Is possible that the flax memory is corrupted? first just on part of the higher addresses than 0x800, and finaly afecting the bootloader?

Thank you very much for any eventual response..
« Last Edit: April 21, 2015, 02:35:47 PM by parotin »