Author Topic: Photos of new SBC83I Single Board Computer  (Read 5315 times)

modtro2

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
    • View Profile
Photos of new SBC83I Single Board Computer
« on: February 03, 2008, 10:14:07 PM »
Attached are some photos of our new SBC83I Single Board Computer. It is assembled with the PIC18F87J10 or PIC18F87J11 chip.

The first photo shows the SMD only version. This is a low cost version without the connectors required for the Daughter board, and without many optional chips (FLASH, RAM,EEPROM...). It is perfect for applications that require multiple serial ports. It has 3 ports (top of board) for iMod Interface Modules. Our Presto iMod Interface Modules have Press-Fit connectors, and press into the 1mm holes in on the SBC83I.

The second photo shows the the SBC83I with two RS232, and one Ethernet iMod Module attached. In stead of the RS232 modules, it can also have other serial interfaces, like RS485, 1-Wire bus, CAN Bus....

The third photo shows a custom application with the SBC83I and two RS232 iMod modules attached to it.

Trifone

  • Full Member
  • ***
  • Posts: 11
    • View Profile
Re: Photos of new SBC83I Single Board Computer
« Reply #1 on: February 24, 2008, 10:13:52 PM »
We are waiting for news on availability of these boards... 
Best regards

modtro2

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
    • View Profile
Re: Photos of new SBC83I Single Board Computer
« Reply #2 on: February 26, 2008, 09:16:04 PM »
Hello

Will be releasing (adding to web page) some of the iMod boards the next two weeks. The SBC83I is however still a couple of weeks (3-4 at least) away.