Author Topic: IOR5E bugs  (Read 3461 times)

kometen

  • Full Member
  • ***
  • Posts: 20
    • View Profile
IOR5E bugs
« on: April 27, 2008, 01:19:20 PM »
Hi.


Please be aware that analog input named a4 from X5 terminal 8 is connected via con1 pin 14 to the SBC65 or 68 RA4 input.
This makes no sense, as this port is not analog. To correct the mistake, elevate upper end of R14 and connect it by a small wire to CON2.2.
Now the analog signal can be correctly read on port F0.

The connection from SJ1 to the Cpu is named for port RD0 but is actually connected to R.G0.

Best regards
Poul